Department
Departement of MECHANICAL ENGINEERING
Research Interests
Specialized in Departement of MECHANICAL ENGINEERING. Focused on academic and scientific development.
Contact Info
University of M'Sila, Algeria
On the Web:
Recent Publications
Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material
Citation
M. ELHADI Abdelmalek, (2025-11-15), "Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material", [international] 3rd International Conference on Recent and Innovative Results in Engineering and Technology , Konya, Turkey
Bootstrap analysis for predicting circularity and cylindricity errors in palm/ jute fiber reinforced hybrid composites
Citation
M. ELHADI Abdelmalek, (2025-05-31), "Bootstrap analysis for predicting circularity and cylindricity errors in palm/ jute fiber reinforced hybrid composites", [national] Measurement , ELSEVIER SCI LTD
Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques
Citation
M. ELHADI Abdelmalek, (2025-04-26), "Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques", [national] Journal of Natural Fibers , Taylor & Francis
Analysis of Entry and Exit Hole Delaminations During Drilling of Jute/Palm Fiber Reinforced Hybrid Composites Using HSS Drill Bits
Citation
M. ELHADI Abdelmalek, (2025-02-11), "Analysis of Entry and Exit Hole Delaminations During Drilling of Jute/Palm Fiber Reinforced Hybrid Composites Using HSS Drill Bits", [national] Journal of Natural Fibers , TAYLOR & FRANCIS INC
Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis
Citation
M. ELHADI Abdelmalek, (2025-01-15), "Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis", [international] 2nd International Conference on Modern and Advanced Research , Konya, Turkey
Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design
Citation
M. ELHADI Abdelmalek, (2025-01-06), "Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design", [national] Journal of Vibration Engineering & Technologies , SPRINGER HEIDELBERG
Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis
Citation
M. ELHADI Abdelmalek, (2025-01-01), "Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis", [national] Journal of Natural Fibers , TAYLOR & FRANCIS INC
Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis
Citation
M. ELHADI Abdelmalek, (2025-01-01), "Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis", [national] Journal of Natural Fibers , TAYLOR & FRANCIS INC
Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)
Citation
M. ELHADI Abdelmalek, (2024-11-28), "Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)", [national] The International Journal of Advanced Manufacturing Technology , SPRINGER LONDON LTD
Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)
Citation
M. ELHADI Abdelmalek, (2024-11-28), "Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)", [national] International Journal of Advanced Manufacturing Technology , Springer
Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms
Citation
M. ELHADI Abdelmalek, (2024-11-10), "Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms", [international] 5th International Conference on Innovative Academic Studies , Konya/Turkey
Influence of the Content of Jute/Luffa Reinforcements on the Tensile Behavior of an Epoxy/Jute/Luffa Hybrid Material
Citation
M. ELHADI Abdelmalek, (2024-09-25), "Influence of the Content of Jute/Luffa Reinforcements on the Tensile Behavior of an Epoxy/Jute/Luffa Hybrid Material", [international] 6th International Conference on Applied Engineering and Natural Sciences , SPRINGER HEIDELBERG , Konya/Turkey
Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis
Citation
M. ELHADI Abdelmalek, (2024-09-15), "Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis", [national] Heliyon , CELL PRESS
Precision drilling optimization in jute/palm fiber reinforced hybrid composites
Citation
M. ELHADI Abdelmalek, (2024-08-15), "Precision drilling optimization in jute/palm fiber reinforced hybrid composites", [national] Measurement , ELSEVIER SCI LTD
Precision drilling optimization in jute/palm fiber reinforced hybrid composites
Citation
M. ELHADI Abdelmalek, (2024-08-15), "Precision drilling optimization in jute/palm fiber reinforced hybrid composites", [national] Measurement , ELSEVIER
Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: a statistical analysis by RSM
Citation
M. ELHADI Abdelmalek, (2024-08-07), "Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: a statistical analysis by RSM", [national] Journal of Composite Materials , SAGE PUBLICATIONS LTD
Normal temperature mechanical properties of 6082 aluminium alloy as a function of tempering temperature: experimental and numerical approach
Citation
M. ELHADI Abdelmalek, (2024-07-17), "Normal temperature mechanical properties of 6082 aluminium alloy as a function of tempering temperature: experimental and numerical approach", [national] Acta Mechanica et Automatica , Bialystok University of Technology
EXPERIMENTAL AND NUMERICAL STUDY OF THE INFLUENCE OF TEMPERING TEMPERATURE ON THE TENSILE BEHAVIOR OF LOW ALLOY STEEL AISI 4140
Citation
M. ELHADI Abdelmalek, (2024-06-20), "EXPERIMENTAL AND NUMERICAL STUDY OF THE INFLUENCE OF TEMPERING TEMPERATURE ON THE TENSILE BEHAVIOR OF LOW ALLOY STEEL AISI 4140", [national] UPB Scientific Bulletin, Series D , Politechnica University of Bucharest
Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite
Citation
M. ELHADI Abdelmalek, (2024-01-05), "Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite", [national] Biomass Conversion and Biorefinery , SPRINGER HEIDELBERG
Evolution of the Coefficient of Friction and the Temperature at the Interface in Dry Friction of a Couple Steel as a Function of Hardness
Citation
M. ELHADI Abdelmalek, (2023-10-11), "Evolution of the Coefficient of Friction and the Temperature at the Interface in Dry Friction of a Couple Steel as a Function of Hardness", [international] 6th International Conference on Recent Trends in Multi-Disciplinary Research , Istanbul, Turkey
Study of the influence of tempering temperature on the tensile behavior of a low alloy steel
Citation
M. ELHADI Abdelmalek, (2022), "Study of the influence of tempering temperature on the tensile behavior of a low alloy steel", [international] 2nd International Conference on Engineering and Applied Natural Sciences. ICEANS 2022 , Konya, Turkey
Effect of Heat Treatment of Mechanical Tensile Characteristics of an Aluminum Alloy
Citation
M. ELHADI Abdelmalek, (2022), "Effect of Heat Treatment of Mechanical Tensile Characteristics of an Aluminum Alloy", [international] 2nd International Conference on Engineering and Applied Natural Sciences. ICEANS 2022 , Konya, Turkey
Evaluation of temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness
Citation
M. ELHADI Abdelmalek, (2022), "Evaluation of temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness", [international] 1st International Conference on Scientific and Academic Research. December 10-13, 2022, Konya, Turkey , Konya, Turkey
Evaluation of temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness
Citation
M. ELHADI Abdelmalek, (2022), "Evaluation of temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness", [international] 1st International Conference on Scientific and Academic Research. December 10-13, 2022, Konya, Turkey , Konya, Turkey
Study of the Influence of Tempering Temperature on the Tensile Behavior of a Low Alloy Steel
Citation
M. ELHADI Abdelmalek, (2022), "Study of the Influence of Tempering Temperature on the Tensile Behavior of a Low Alloy Steel", [international] 2nd International Conference on Engineering and Applied Natural Sciences , Turkey
Effect of Heat Treatment of Mechanical Tensile Characteristics of an Aluminum Alloy
Citation
M. ELHADI Abdelmalek, (2022), "Effect of Heat Treatment of Mechanical Tensile Characteristics of an Aluminum Alloy", [international] 2nd International Conference on Engineering and Applied Natural Sciences , Turkey
Evaluation of Temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness
Citation
M. ELHADI Abdelmalek, (2022), "Evaluation of Temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness", [international] 1st International Conference on Scientific and Academic Research , Turkey
EXPERIMENTAL INVESTIGATIONS OF SURFACE WEAR BY DRY SLIDING AND INDUCED DAMAGE OF MEDIUM CARBON STEEL
Citation
M. ELHADI Abdelmalek, (2021), "EXPERIMENTAL INVESTIGATIONS OF SURFACE WEAR BY DRY SLIDING AND INDUCED DAMAGE OF MEDIUM CARBON STEEL", [international] DIAGNOSTYKA , Polish Society of Technical Diagnostics , Pologne
ANALYTICAL CALCULATION OF TEMPERATURES AT THE INTERFACE DURING THE DRY FRICTION OF THE COUPLE OF STEEL.
Citation
M. ELHADI Abdelmalek, (2019), "ANALYTICAL CALCULATION OF TEMPERATURES AT THE INTERFACE DURING THE DRY FRICTION OF THE COUPLE OF STEEL.", [international] 5th Conference on Advances in Mechanical Engineering, Istanbul 2019 – ICAME2019 , Istanbul, Turquie.
EFFECT OF NORMAL LOAD AND HARDNESS ON THE EVOLUTION OF FRICTION COEFFICIENT OF UNALLOYED CARBON STEELS.
Citation
M. ELHADI Abdelmalek, (2019), "EFFECT OF NORMAL LOAD AND HARDNESS ON THE EVOLUTION OF FRICTION COEFFICIENT OF UNALLOYED CARBON STEELS.", [international] 5th Conference on Advances in Mechanical Engineering, Istanbul 2019 – ICAME2019 , Istanbul, Turquie.
Tribological study of the steel couples in dynamic contact according to hardness.
Citation
M. ELHADI Abdelmalek, (2018), "Tribological study of the steel couples in dynamic contact according to hardness.", [international] 4th Conference on Advances in Mechanical Engineering, 4th Conference on Advances in Mechanical Engineering, Istanbul 2018 – ICAME20182018 – ICAME2018 , Istanbul, Turquie
Effets de la force normale et de la dureté sur le comportement tribologique de l’acier 42CrMo4 contre l’acier C55 lors de glissement à sec.
Citation
M. ELHADI Abdelmalek, (2017), "Effets de la force normale et de la dureté sur le comportement tribologique de l’acier 42CrMo4 contre l’acier C55 lors de glissement à sec.", [international] 3ème I.C.M: 3ème International Conférence of Mechanic , Annaba, Algérie.
Etude du comportement en frottement et en usure du contact glissant sec acier-acier : conséquences sur les surfaces frottantes.
Citation
M. ELHADI Abdelmalek, (2017), "Etude du comportement en frottement et en usure du contact glissant sec acier-acier : conséquences sur les surfaces frottantes.", [international] Journées Internationales Francophones sur la Tribologie (JIFT 2017) , Saint-Ouen. France.
Study of Surface Wear and Damage Induced by Dry Sliding of Tempered AISI 4140 Steel against Hardened AISI 1055 Steel
Citation
M. ELHADI Abdelmalek, (2016), "Study of Surface Wear and Damage Induced by Dry Sliding of Tempered AISI 4140 Steel against Hardened AISI 1055 Steel", [national] Tribology in Industry , Faculty of Engineering