Department
Departement of MECHANICAL ENGINEERING
Research Interests
Specialized in Departement of MECHANICAL ENGINEERING. Focused on academic and scientific development.
Contact Info
University of M'Sila, Algeria
On the Web:
Recent Publications
Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material
Citation
M. ARSLANE Mustapha, (2025-11-15), "Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material", [international] 3rd International Conference on Recent and Innovative Results in Engineering and Technology , Konya, Turkey
3D Tolerance Analysis and Propagation Using Jacobian–Torsor in a Conical Assembly
Citation
M. ARSLANE Mustapha, (2025-11-11), "3D Tolerance Analysis and Propagation Using Jacobian–Torsor in a Conical Assembly", [national] Proceedings of the 2nd Conference on Mechanical, Energy and Material Engineering, CMEME 2025 , Université de Biskra
Unified Jacobian–Torsor Framework for Automatic Tolerancing and Geometric Variation Analysis
Citation
M. ARSLANE Mustapha, (2025-10-29), "Unified Jacobian–Torsor Framework for Automatic Tolerancing and Geometric Variation Analysis", [national] 1sh National Seminar on Structural Mechanics and Materials (SNMSM’25) , Université Mohamed Boudiaf / M'sila
Influence of Heat Treatments on the Fatigue Resistance of Recycled Steels with a Low Environmental Footprint
Citation
M. ARSLANE Mustapha, (2025-09-18), "Influence of Heat Treatments on the Fatigue Resistance of Recycled Steels with a Low Environmental Footprint", [national] THE 1st NATIONAL CONFERENCE ON CHEMISTRY AND ASSOCIATED SCIENCES (1st NCC-AS) , Higher School of Teachers in Bousaada, M’Sila, Algeria
Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques
Citation
M. ARSLANE Mustapha, (2025-04-26), "Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques", [national] Journal of Natural Fibers , Taylor & Francis
Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites
Citation
M. ARSLANE Mustapha, (2025-02-17), "Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites", [national] Measurement , ELSEVIER
Optimisation des Tolérances Géométriques des Formes Complexes par Rétro Conception Basée sur l'Émission Laser
Citation
M. ARSLANE Mustapha, (2025-02-17), "Optimisation des Tolérances Géométriques des Formes Complexes par Rétro Conception Basée sur l'Émission Laser", [national] 2nd National seminar of Physics, Chemistry and their Applications NSPCA'25 , University Mohamed El Bachir El Ibrahimi of Bordj Bou Arreridj - Algeria
Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis
Citation
M. ARSLANE Mustapha, (2025-01-15), "Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis", [international] 2nd International Conference on Modern and Advanced Research , Konya, Turkey
Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design
Citation
M. ARSLANE Mustapha, (2025-01-07), "Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design", [national] Journal of Vibration Engineering & Technologies , Springer
Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis
Citation
M. ARSLANE Mustapha, (2024-12-26), "Optimization of Drilling Parameters in Natural Fibers Composite Plates Based on Grey Relational Analysis", [national] Journal of Natural Fibers WJNF , Taylor & Francis
Efficient Drilling Path Optimization in CNC Machining Using Genetic Algorithms and TSP Methodology
Citation
M. ARSLANE Mustapha, (2024-12-13), "Efficient Drilling Path Optimization in CNC Machining Using Genetic Algorithms and TSP Methodology", [international] the International Conference on Multidisciplinary Sciences and Technological Developments (ICMUSTED 2024) , Turkey
Optimization of Drilling Performance in Natural Fiber Composites Using Taguchi and Desirability Function Methods
Citation
M. ARSLANE Mustapha, (2024-12-13), "Optimization of Drilling Performance in Natural Fiber Composites Using Taguchi and Desirability Function Methods", [international] the International Conference on Multidisciplinary Sciences and Technological Developments (ICMUSTED 2024) , Turkey
Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)
Citation
M. ARSLANE Mustapha, (2024-11-28), "Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)", [national] International Journal of Advanced Manufacturing Technology , Springer
Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms
Citation
M. ARSLANE Mustapha, (2024-10-10), "Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms", [international] 5th International Conference on Innovative Academic Studies , Konya, Turkey
Innovative Fixture for Precise Machining of Turbine Blades: Design and SDT Validation
Citation
M. ARSLANE Mustapha, (2024-09-11), "Innovative Fixture for Precise Machining of Turbine Blades: Design and SDT Validation", [international] 3rd International Conference on Scientific and Innovative Studies , Konya, Turkey
A Comprehensive Method for Tolerance Analysis in Complex Mechanical Assemblies Using the Unified Jacobian–Torsor Model and Simulation-Based Uncertainty Quantification
Citation
M. ARSLANE Mustapha, (2024-09-11), "A Comprehensive Method for Tolerance Analysis in Complex Mechanical Assemblies Using the Unified Jacobian–Torsor Model and Simulation-Based Uncertainty Quantification", [international] 3rd International Conference on Scientific and Innovative Studies , Konya, Turkey
Milling Behavior of Untreated and NaOH-Treated Alpha Fiber Composites: Effects of Fiber Orientation
Citation
M. ARSLANE Mustapha, (2024-09-11), "Milling Behavior of Untreated and NaOH-Treated Alpha Fiber Composites: Effects of Fiber Orientation", [international] 3rd International Conference on Scientific and Innovative Studies , Konya, Turkey
Precision drilling optimization in jute/palm fiber reinforced hybrid composites
Citation
M. ARSLANE Mustapha, (2024-08-15), "Precision drilling optimization in jute/palm fiber reinforced hybrid composites", [national] Measurement , ELSEVIER
An advanced framework for tolerance analysis of cam‑clamping devices integrating unified Jacobian–Torsor model, Monte Carlo simulation, and bootstrap technique
Citation
M. ARSLANE Mustapha, (2024-08-01), "An advanced framework for tolerance analysis of cam‑clamping devices integrating unified Jacobian–Torsor model, Monte Carlo simulation, and bootstrap technique", [national] The International Journal of Advanced Manufacturing Technology , Springer
Assessment and analysis of drilling‑induced damage in jute/palm datefiber‑reinforced polyester hybrid composite
Citation
M. ARSLANE Mustapha, (2024-01-05), "Assessment and analysis of drilling‑induced damage in jute/palm datefiber‑reinforced polyester hybrid composite", [national] Biomass Conversion and Biorefinery , Springer
Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms
Citation
M. ARSLANE Mustapha, (2023-12-28), "Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms", [national] The International Journal of Advanced Manufacturing Technology , Springer
Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material
Citation
M. ARSLANE Mustapha, (2023-08-16), "Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material", [national] The International Journal of Advanced Manufacturing Technology , Springer
OPTIMISATION PAR ALGORITHME GENETIQUE (AG) DE SYSTEME D'ISOSTATISME D'UNE AILETTE DE TURBINE A GAZ
Citation
M. ARSLANE Mustapha, (2022-10-26), "OPTIMISATION PAR ALGORITHME GENETIQUE (AG) DE SYSTEME D'ISOSTATISME D'UNE AILETTE DE TURBINE A GAZ", [international] 1ère Conférence de Mécanique appliquée à l’Aéronautique (CMA’1) , ECOLE SUPERIEURE DES TECHNIQUES DE L’AERONAUTIQUE CHAHID RAHALI MOUSSA
Effect of the machining strategy on the surface roughness in hemispherical milling of nickel-based superalloys (IN 718)
Citation
M. ARSLANE Mustapha, (2022-09-10), "Effect of the machining strategy on the surface roughness in hemispherical milling of nickel-based superalloys (IN 718)", [international] 1st International Conference on Innovative Academic Studies , Konya, Turkey
Conception et réalisation d'un dispositif d'usinage pour ailette de turbine à gaz
Citation
M. ARSLANE Mustapha, (2022-02-09), "Conception et réalisation d'un dispositif d'usinage pour ailette de turbine à gaz", [national] University of M'sila
CONTRIBUTION A L’USINAGE DES PIECES DE FORMES COMPLEXES SUR MACHINE-OUTIL A COMMANDE NUMERIQUE
Citation
M. ARSLANE Mustapha, (2022-01-11), "CONTRIBUTION A L’USINAGE DES PIECES DE FORMES COMPLEXES SUR MACHINE-OUTIL A COMMANDE NUMERIQUE", [national] University of M'sila
Development and validation of a machining fixture for complex-shaped components based on Plückerian matrix approach and SDT concept.
Citation
M. ARSLANE Mustapha, (2021-04-01), "Development and validation of a machining fixture for complex-shaped components based on Plückerian matrix approach and SDT concept.", [national] The International Journal of Advanced Manufacturing Technology , Springer
Conception et fabrication d’un montage d’usinage pour ailettes mobiles d’une turbine à gaz
Citation
M. ARSLANE Mustapha, (2018-11-28), "Conception et fabrication d’un montage d’usinage pour ailettes mobiles d’une turbine à gaz", [international] International conference on advanced mechanics and renewable energies , BOUMERDES
Réalisation d’un montage d’usinage pour les pièces de formes complexes
Citation
M. ARSLANE Mustapha, (2018-10-23), "Réalisation d’un montage d’usinage pour les pièces de formes complexes", [international] International seminar in industrial engineering and applied mathematics , Université 20 Août 1955 / SKIKDA