Department
Departement of MECHANICAL ENGINEERING
Research Interests
Contact Info
University of M'Sila, Algeria
On the Web:
Recent Publications
A metrological framework for fixture-induced uncertainty quantification in dimensional inspection using bootstrap-validated genetic algorithm optimization
Citation
M. SLAMANI Mohamed, (2025-12-11), "A metrological framework for fixture-induced uncertainty quantification in dimensional inspection using bootstrap-validated genetic algorithm optimization", [national] Measurement , Elsevier
Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material
Citation
M. SLAMANI Mohamed, (2025-11-15), "Effect of Feed Rate and Drill Point Angle on the Delamination Factor during Drilling of a Hybrid Composite Material", [international] 3rd International Conference on Recent and Innovative Results in Engineering and Technology , Konya, Turkey
Pales pneumatiques productrices de couple pour rotor principal auto-génératif d’hélicoptère
Citation
M. SLAMANI Mohamed, (2025-11-12), "Pales pneumatiques productrices de couple pour rotor principal auto-génératif d’hélicoptère", [national] University of M'sila
3D Tolerance Analysis and Propagation Using Jacobian–Torsor in a Conical Assembly
Citation
M. SLAMANI Mohamed, (2025-11-11), "3D Tolerance Analysis and Propagation Using Jacobian–Torsor in a Conical Assembly", [national] Proceedings of the 2nd Conference on Mechanical, Energy and Material Engineering, CMEME 2025 , Université de Biskra
Unified Jacobian–Torsor Framework for Automatic Tolerancing and Geometric Variation Analysis
Citation
M. SLAMANI Mohamed, (2025-10-29), "Unified Jacobian–Torsor Framework for Automatic Tolerancing and Geometric Variation Analysis", [national] 1sh National Seminar on Structural Mechanics and Materials (SNMSM’25) , Université Mohamed Boudiaf / M'sila
The effect of lubricant and nanofiller additives on drilling temperature in GFRP composites
Citation
M. SLAMANI Mohamed, (2025-10-12), "The effect of lubricant and nanofiller additives on drilling temperature in GFRP composites", [national] Journal of Composites Science , MDPI
Influence of Heat Treatments on the Fatigue Resistance of Recycled Steels with a Low Environmental Footprint
Citation
M. SLAMANI Mohamed, (2025-09-18), "Influence of Heat Treatments on the Fatigue Resistance of Recycled Steels with a Low Environmental Footprint", [national] THE 1st NATIONAL CONFERENCE ON CHEMISTRY AND ASSOCIATED SCIENCES (1st NCC-AS) , Higher School of Teachers in Bousaada, M’Sila, Algeria
Evaluation of thrust force, delamination and hole quality during drilling an alfa-jute/epoxy natural fiber hybrid composite
Citation
M. SLAMANI Mohamed, (2025-07-15), "Evaluation of thrust force, delamination and hole quality during drilling an alfa-jute/epoxy natural fiber hybrid composite", [national] Journal of Composite Materials , Sage
Advanced Optimization of Drilling Parameters in Composite Materials: A TOPSIS-Based Approach for Enhanced Manufacturing Precision
Citation
M. SLAMANI Mohamed, (2025-07-07), "Advanced Optimization of Drilling Parameters in Composite Materials: A TOPSIS-Based Approach for Enhanced Manufacturing Precision", [national] Journal of Natural Fibers , Taylor & Francis
Investigating the Impact of Drill Point Angles on the Drilling Behavior of Date Palm Biocomposites: Experimental, ANN, and Taguchi Modeling
Citation
M. SLAMANI Mohamed, (2025-06-23), "Investigating the Impact of Drill Point Angles on the Drilling Behavior of Date Palm Biocomposites: Experimental, ANN, and Taguchi Modeling", [national] Journal of Natural Fibers , Taylor & Francis
Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites
Citation
M. SLAMANI Mohamed, (2025-05-31), "Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites", [national] Measurement , Elsevier
Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments
Citation
M. SLAMANI Mohamed, (2025-05-08), "Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments", [national] Journal of Composite Materials , Sage
Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques
Citation
M. SLAMANI Mohamed, (2025-04-26), "Quality Evaluation and Predictive Analysis of Drilled Holes in Jute/Palm/Polyester Hybrid Bio-Composites Using CMM and ANN Techniques", [national] Journal of Natural Fibers , Taylor & Francis
Advancements and optimization in fixture layouts and machining processes: a comprehensive review in the context of Industry 4.0
Citation
M. SLAMANI Mohamed, (2025-04-10), "Advancements and optimization in fixture layouts and machining processes: a comprehensive review in the context of Industry 4.0", [national] The International Journal of Advanced Manufacturing Technology , Springer
Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites
Citation
M. SLAMANI Mohamed, (2025-02-17), "Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites", [national] Measurement , ELSEVIER
Optimisation des Tolérances Géométriques des Formes Complexes par Rétro Conception Basée sur l'Émission Laser
Citation
M. SLAMANI Mohamed, (2025-02-17), "Optimisation des Tolérances Géométriques des Formes Complexes par Rétro Conception Basée sur l'Émission Laser", [national] 2nd National seminar of Physics, Chemistry and their Applications NSPCA'25 , University Mohamed El Bachir El Ibrahimi of Bordj Bou Arreridj - Algeria
Analysis of Entry and Exit Hole Delaminations During Drilling of Jute/Palm Fiber Reinforced Hybrid Composites Using HSS Drill Bits
Citation
M. SLAMANI Mohamed, (2025-02-11), "Analysis of Entry and Exit Hole Delaminations During Drilling of Jute/Palm Fiber Reinforced Hybrid Composites Using HSS Drill Bits", [national] Journal of Natural Fibers , Taylor & Francis
Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis
Citation
M. SLAMANI Mohamed, (2025-01-15), "Precision Drilling Optimization for Hybrid Natural Fiber Composites: Advancing Sustainable Machining Practices Through Grey Relational Analysis", [international] 2nd International Conference on Modern and Advanced Research , Konya, Turkey
Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design
Citation
M. SLAMANI Mohamed, (2025-01-06), "Optimization of Manufacturing Parameters for Minimizing Vibrations and Surface Roughness in Milling Using Box–Behnken Design", [national] Journal of Vibration Engineering & Technologies , Springer
ENHANCING ROBOTIC TRIMMING ACCURACY OF CARBON FIBER REINFORCED POLYMERS: INVESTIGATING THE IMPACT OF CUTTING PARAMETERS.
Citation
M. SLAMANI Mohamed, (2024-12-24), "ENHANCING ROBOTIC TRIMMING ACCURACY OF CARBON FIBER REINFORCED POLYMERS: INVESTIGATING THE IMPACT OF CUTTING PARAMETERS.", [national] Academic Journal of Manufacturing Engineering , Academic Journal of Manufacturing Engineering
Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)
Citation
M. SLAMANI Mohamed, (2024-11-28), "Multi-response optimization of drilling parameters in hybrid natural fiber composites using Taguchi and desirability function analysis (DFA)", [national] International Journal of Advanced Manufacturing Technology , Springer
Conception et réalisation d’un dispositif d’usinage pour ailette de turbine à gaz
Citation
M. SLAMANI Mohamed, (2024-11-03), "Conception et réalisation d’un dispositif d’usinage pour ailette de turbine à gaz", [national] Université Mohamed Boudiaf M’sila
Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms
Citation
M. SLAMANI Mohamed, (2024-10-10), "Modeling Surface Roughness of Epoxy/Alfa Fiber Biocomposites with a Neural Network Architecture Optimized by Genetic Algorithms", [international] n 5th International Conference on Innovative Academic Studies , Konya/Turkey
Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis
Citation
M. SLAMANI Mohamed, (2024-09-15), "Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis", [national] Heliyon , Elsevier
A Comprehensive Method for Tolerance Analysis in Complex Mechanical Assemblies Using the Unified Jacobian–Torsor Model and Simulation-Based Uncertainty Quantification
Citation
M. SLAMANI Mohamed, (2024-09-11), "A Comprehensive Method for Tolerance Analysis in Complex Mechanical Assemblies Using the Unified Jacobian–Torsor Model and Simulation-Based Uncertainty Quantification", [international] 3rd International Conference on Scientific and Innovative Studies ICSIS 2024 , Konya/Turkey
Innovative Fixture for Precise Machining of Turbine Blades: Design and SDT Validation
Citation
M. SLAMANI Mohamed, (2024-09-11), "Innovative Fixture for Precise Machining of Turbine Blades: Design and SDT Validation", [international] 3rd International Conference on Scientific and Innovative Studies ICSIS 2024 , Konya/Turkey
Milling Behavior of Untreated and NaOH-Treated Alpha Fiber Composites: Effects of Fiber Orientation
Citation
M. SLAMANI Mohamed, (2024-09-11), "Milling Behavior of Untreated and NaOH-Treated Alpha Fiber Composites: Effects of Fiber Orientation", [international] n 3rd International Conference on Scientific and Innovative Studies ICSIS 2024 , Konya/Turkey
An advanced framework for tolerance analysis of cam-clamping devices integrating unified Jacobian–Torsor model, Monte Carlo simulation, and bootstrap technique
Citation
M. SLAMANI Mohamed, (2024-08-15), "An advanced framework for tolerance analysis of cam-clamping devices integrating unified Jacobian–Torsor model, Monte Carlo simulation, and bootstrap technique", [national] The International Journal of Advanced Manufacturing Technology , Springer
Precision drilling optimization in jute/palm fiber reinforced hybrid composites
Citation
M. SLAMANI Mohamed, (2024-08-15), "Precision drilling optimization in jute/palm fiber reinforced hybrid composites", [national] Measurement , Elsevier
Precision drilling optimization in jute/palm fiber reinforced hybrid composites
Citation
M. SLAMANI Mohamed, (2024-08-15), "Precision drilling optimization in jute/palm fiber reinforced hybrid composites", [national] Measurement , ELSEVIER
Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: a statistical analysis by RSM
Citation
M. SLAMANI Mohamed, (2024-08-07), "Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: a statistical analysis by RSM", [national] Journal of Composite Materials , SAGE PUBLICATIONS LTD
Impact of fiber orientation on cutting forces and surface quality in flax/epoxy composite machining
Citation
M. SLAMANI Mohamed, (2024-08-01), "Impact of fiber orientation on cutting forces and surface quality in flax/epoxy composite machining", [national] Journal of Composite Materials , SAGE PUBLICATIONS LTD
FABRICATING A MOLD USING CNC TECHNOLOGY FOR COMPOSITE MATERIAL TENSILE TEST SAMPLES
Citation
M. SLAMANI Mohamed, (2024-05-06), "FABRICATING A MOLD USING CNC TECHNOLOGY FOR COMPOSITE MATERIAL TENSILE TEST SAMPLES", [national] Academic Journal of Manufacturing Engineering , Editura Politehnica
AN EFFECTIVE METHOD FOR THE IDENTIFICATION OF THE STRAIGHTNESS ERROR AND ANGULAR ERRORS OF A PRISMATIC MOBILITY BASED ON BRYAN PRINCIPLE.
Citation
M. SLAMANI Mohamed, (2024-03-15), "AN EFFECTIVE METHOD FOR THE IDENTIFICATION OF THE STRAIGHTNESS ERROR AND ANGULAR ERRORS OF A PRISMATIC MOBILITY BASED ON BRYAN PRINCIPLE.", [national] ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING , ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING
Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications
Citation
M. SLAMANI Mohamed, (2024-03-15), "Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications", [national] Industrial Robot: the international journal of robotics research and application , Emerald Insight
INVESTIGATION FOR THE AUTOMATED GENERATION OF TOOLPATHS ON A 3AXIS CNC MACHINE
Citation
M. SLAMANI Mohamed, (2024-01-11), "INVESTIGATION FOR THE AUTOMATED GENERATION OF TOOLPATHS ON A 3AXIS CNC MACHINE", [national] Academic Journal of Manufacturing Engineering , Academic Journal of Manufacturing Engineering- Editura Politehnica
Water Absorption Behavior of Date Palm Fruit Branches Fiber (DPF) Composites: Experimental and Statistical Analyses
Citation
M. SLAMANI Mohamed, (2024-01-09), "Water Absorption Behavior of Date Palm Fruit Branches Fiber (DPF) Composites: Experimental and Statistical Analyses", [national] Journal of natural fibers , Taylor and Francis
Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite
Citation
M. SLAMANI Mohamed, (2024-01-05), "Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite", [national] Biomass Conversion and Biorefinery , Springer
Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite
Citation
M. SLAMANI Mohamed, (2024-01-01), "Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite", [national] Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , SAGE PUBLICATIONS LTD
Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms
Citation
M. SLAMANI Mohamed, (2024-01-01), "Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms", [national] The International Journal of Advanced Manufacturing Technology , Springer
Création et mise en place d'un montage d'usinage spécialement conçu pour usiner les surfaces de référence d'une ailette de turbine à gaz
Citation
M. SLAMANI Mohamed, (2023-11-19), "Création et mise en place d'un montage d'usinage spécialement conçu pour usiner les surfaces de référence d'une ailette de turbine à gaz", [national] Université Mohamed Boudiaf M’sila
NEW METHOD FOR THE MICRO- AND NANOHARDNESS MEASUREMENT OF THIN FILM OF MONOLAYER SOLID BY THE INDENTATION OF A SHARP NEEDLE OF A CONE TIP
Citation
M. SLAMANI Mohamed, (2023-10-13), "NEW METHOD FOR THE MICRO- AND NANOHARDNESS MEASUREMENT OF THIN FILM OF MONOLAYER SOLID BY THE INDENTATION OF A SHARP NEEDLE OF A CONE TIP", [national] Strength of Materials , Springer
REVERSE ENGINEERING OF TRAM TRANSMISSION GEAR
Citation
M. SLAMANI Mohamed, (2023-10-01), "REVERSE ENGINEERING OF TRAM TRANSMISSION GEAR", [national] ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING , ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING
ANALYSIS AND MODELING OF THERMALLY INDUCED POSITIONING ERRORS BASED ON LASER INTERFEROMETER MEASUREMENTS
Citation
M. SLAMANI Mohamed, (2023-10-01), "ANALYSIS AND MODELING OF THERMALLY INDUCED POSITIONING ERRORS BASED ON LASER INTERFEROMETER MEASUREMENTS", [national] ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING , ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING
COMPREHENSIVE STUDY OF THE DELAMINATION OF GLASS-FIBER BASED COMPOSITES
Citation
M. SLAMANI Mohamed, (2023-10-01), "COMPREHENSIVE STUDY OF THE DELAMINATION OF GLASS-FIBER BASED COMPOSITES", [national] ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING , ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING
Modelling and optimization of the absorption rate of date palm fiber reinforced composite using response surface methodology
Citation
M. SLAMANI Mohamed, (2023-08-22), "Modelling and optimization of the absorption rate of date palm fiber reinforced composite using response surface methodology", [national] Alexandria Engineering Journal , Elsevier
Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material
Citation
M. SLAMANI Mohamed, (2023-08-16), "Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material", [national] The International Journal of Advanced Manufacturing Technology , Springer
Développement d’un appareil pour maintenir les ailettes de turbine à gaz pendant l'inspection sur machines à mesurer tridimensionnelles (MMT)
Citation
M. SLAMANI Mohamed, (2023-06-18), "Développement d’un appareil pour maintenir les ailettes de turbine à gaz pendant l'inspection sur machines à mesurer tridimensionnelles (MMT)", [national] Université Mohamed Boudiaf M’sila
A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fbers (NFRP)
Citation
M. SLAMANI Mohamed, (2023-04-03), "A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fbers (NFRP)", [national] Discover Mechanical Engineering , Springer
INVESTIGATION OF MACHINABILITY OF BIOCOMPOSITES: MODELING AND ANN OPTIMIZATION
Citation
M. SLAMANI Mohamed, (2023-01-15), "INVESTIGATION OF MACHINABILITY OF BIOCOMPOSITES: MODELING AND ANN OPTIMIZATION", [national] ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING , ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING
Experimental Investigation of the Absorption Behavior of Date Palm Fiber Reinforced Iso-Polyester Composites: Artificial Neuron Network (ANN) Modeling
Citation
M. SLAMANI Mohamed, (2022-10-25), "Experimental Investigation of the Absorption Behavior of Date Palm Fiber Reinforced Iso-Polyester Composites: Artificial Neuron Network (ANN) Modeling", [national] Journal of Natural Fibers , Taylor & Francis
Conception et réalisation d'un dispositif d'usinage pour ailette de turbine à gaz
Citation
M. SLAMANI Mohamed, (2022-02-09), "Conception et réalisation d'un dispositif d'usinage pour ailette de turbine à gaz", [national] University of M'sila
Correlation assessment and modeling of intra axis errors of prismatic axes for CNC machine tools
Citation
M. SLAMANI Mohamed, (2022), "Correlation assessment and modeling of intra axis errors of prismatic axes for CNC machine tools", [national] The International Journal of Advanced Manufacturing Technology , Springer
Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite
Citation
M. SLAMANI Mohamed, (2022), "Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite", [national] PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , SAGE PUBLICATIONS LTD
Assessment of induced delamination drilling of natural fiber reinforced composites: a statistical analysis
Citation
M. SLAMANI Mohamed, (2022), "Assessment of induced delamination drilling of natural fiber reinforced composites: a statistical analysis", [national] Journal of Materials Research and Technology , Elsevier
Effect of the machining strategy on the surface roughness in hemispherical milling of nickel-based superalloys (IN 718)
Citation
M. SLAMANI Mohamed, (2022), "Effect of the machining strategy on the surface roughness in hemispherical milling of nickel-based superalloys (IN 718)", [international] 1st International Conference on Innovative Academic Studies , Konya/Turkey
Locator Placement Optimization during Machining Turbine Blades Using Genetic Algorithm
Citation
M. SLAMANI Mohamed, (2022), "Locator Placement Optimization during Machining Turbine Blades Using Genetic Algorithm", [international] 3rd International Conference on Applied Engineering and Natural Sciences , Konya, Turkey
Assessment of the Hole Quality During Drilling Alfa Fiber (Stipa tenacissima) Reinforced Composites
Citation
M. SLAMANI Mohamed, (2022), "Assessment of the Hole Quality During Drilling Alfa Fiber (Stipa tenacissima) Reinforced Composites", [international] 3rd International Conference on Applied Engineering and Natural Sciences , Konya, Turkey
EFFECT OF ALKALI TREATMENT ON THE TENSILE PROPERTIES OF ALFA FIBERS (STIPA TENACISSIMA L) REINFORCED POLYMER COMPOSITES
Citation
M. SLAMANI Mohamed, (2022), "EFFECT OF ALKALI TREATMENT ON THE TENSILE PROPERTIES OF ALFA FIBERS (STIPA TENACISSIMA L) REINFORCED POLYMER COMPOSITES", [international] 1st International Conference on Innovative Academic Studies , Konya/Turkey
A Comparative Evaluation of the Performance of Three CNC Machine Tools
Citation
M. SLAMANI Mohamed, (2022), "A Comparative Evaluation of the Performance of Three CNC Machine Tools", [international] 3rd International Conference on Applied Engineering and Natural Sciences , Konya, Turkey
Tolerance Analysis Using the Small Displacement Torsor Concept
Citation
M. SLAMANI Mohamed, (2022), "Tolerance Analysis Using the Small Displacement Torsor Concept", [international] 3rd International Conference on Applied Engineering and Natural Sciences , Konya, Turkey
Analysis of the effect of cutting conditions for circularity and cylindricity errors for drilling bio composites
Citation
M. SLAMANI Mohamed, (2022), "Analysis of the effect of cutting conditions for circularity and cylindricity errors for drilling bio composites", [international] 2nd International Conference on Engineering and Applied Natural Sciences on 15-18 October in 2022 at Konya/Turkey , Turkey
Evaluation of Temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness
Citation
M. SLAMANI Mohamed, (2022), "Evaluation of Temperature at the Interface of Pairs of Steels in Dry Sliding as a function of Hardness", [international] 1st International Conference on Scientific and Academic Research , Turkey
Development and validation of a machining fixture for complex-shaped components based on Plückerian matrix approach and SDT concept
Citation
M. SLAMANI Mohamed, (2021), "Development and validation of a machining fixture for complex-shaped components based on Plückerian matrix approach and SDT concept", [national] The International Journal of Advanced Manufacturing Technology , Springer
Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design
Citation
M. SLAMANI Mohamed, (2021), "Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design", [national] Measurement , Elsevier
Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation
Citation
M. SLAMANI Mohamed, (2021), "Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation", [national] International Journal of Material Forming , Springer
Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts
Citation
M. SLAMANI Mohamed, (2021), "Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts", [national] Physica A: Statistical Mechanics and its Applications , Elsevier
Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of Carbon fiber reinforced polymers
Citation
M. SLAMANI Mohamed, (2020), "Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of Carbon fiber reinforced polymers", [national] Measurement , Elsevier
Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs)
Citation
M. SLAMANI Mohamed, (2019), "Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs)", [national] Journal of Manufacturing Processes , Elsevier
Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers
Citation
M. SLAMANI Mohamed, (2019), "Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers", [national] International Journal of Material Forming , Springer